1. 取扱説明書・マニュアル >
2. アルファロメオ >
3. 自動車 >
4. ジュリエッタ の使い方、故障・トラブル対処法 >
5. ジュリエッタ の取扱説明書・マニュアル

ジュリエッタの取扱説明書・マニュアル [全292ページ 13.06MB]

SIDE LIGHTS/DIPPED BEAMHEADLIGHTSWith the ignition key turned to MAR, turn ring nut A fig. 39 to.The daytime running lights are switched off and the side lights anddipped headlights are switched on. The warning lightswitcheson on the instrument panel.PARKING LIGHTS These lights can only be switched on with ignition key at STOP orremoved, by moving ring nut A fig. 39 first to positionand then toposition.The warning lightswitches on on the instrument panel.When the direction indicator stalk is activated the side for the lights(left or right) can be selected.AUTOMATIC LIGHTING CONTROL(AUTOLIGHT) (Dusk sensor)(for versions/markets, where provided)This infrared LED sensor, combined with the rain sensor and located onthe windscreen, detects the variations in outside brightness dependingon the light sensitivity set with the Set-up Menu: the greater thesensitivity, the less external light is required to activate the exteriorlights.ActivationThe dusk sensor activates when ring nut A fig. 39 is turned to.Inthis way the side lights and dipped headlights are activatedautomatically according to the external light level.IMPORTANT The sensor is unable to detect the presence of fog.Therefore under these circumstances, these lights must be turned onmanually.When the lights are turned on by the sensor, the fog lights (forversions/markets, where provided) and the rear fog lights may beturned on.When the lights are automatically switched off, the front and rear foglights (if activated) are also switched off. The next time the lights areswitched on automatically, the fog lights must be reactivated manually(if required).With the sensor active, it is possible to flash the headlights but themain beam headlights cannot be switched on. If you need to turn theselights on, turn ring nut A to positionand turn the dippedheadlights on.When the lights have been activated automatically and are thenswitched off by the sensor, the dipped beam headlights are switchedoff first, followed by the side lights a few seconds later.If the sensor is activated but is malfunctioning, the side lights anddipped beam headlights are switched on irrespective of the outsidelight level and the sensor failure is indicated on the instrument paneldisplay.It is also possible to deactivate the sensor and switch on these lights ifnecessary.63GETTING TOKNOW YOUR CARSAFETYSTARTING ANDDRIVINGIN AN EMERGENCYSERVICING ANDMAINTENANCETECHNICALSPECIFICATIONSINDEX

このマニュアルの目次

Copyright © 2013 Gizport.jp All Rights Reserved.