ジュリエッタの取扱説明書・マニュアル [全292ページ 13.06MB]
94995.pdf
http://153.127.244.43/.../94995.pdf - 13.06MB
- キャッシュ
74391view
292page / 13.06MB
BONNET OPENING Proceed as follows:❒ pull lever A fig. 78 in the direction indicated by the arrow;❒ operate lever B, in the direction indicated by the arrow, and raisethe bonnet.IMPORTANT Two side gas shock absorbers are provided to assist inopening the bonnet. Do not tamper with the shock absorber andaccompany the bonnet while lifting it.IMPORTANT Before lifting up the bonnet make sure that the windscreenwipers are in the rest position and not operational.CLOSING Lower the bonnet to approximately 20 centimetres from the enginecompartment and let it drop. Make sure that the bonnet is completelyclosed and not only fastened by the safety catch by trying to open it. Ifit is not perfectly closed, open the bonnet and repeat the procedure.Do not simply press it.IMPORTANT Always check that the bonnet is closed correctly to avoidit opening while the car is travelling.The following plate is applied inside the engine compartment fig. 79:For safety reasons, the bonnet must always beproperly closed while driving. Make sure that thebonnet is perfectly closed and that the lock is engaged.If you discover during travel that the lock is not fully engaged,stop immediately and close the bonnet in the correct manner.Perform these operations only when the car isstationary.fig. 78A0K0116fig. 79A0K152093GETTING TOKNOW YOUR CARSAFETYSTARTING ANDDRIVINGIN AN EMERGENCYSERVICING ANDMAINTENANCETECHNICALSPECIFICATIONSINDEX
参考になったと評価
66人が参考になったと評価しています。