シボレーサバーバンの取扱説明書・マニュアル [全578ページ 3.04MB]
2009_chevrolet_suburban_owners.pdf
http://www.chevrolet.com/.../2009_chevrolet_suburban_owners.pdf - 3.04MB
- キャッシュ
66072view
578page / 3.04MB
8. Proceed to the driver side rear tire, and repeat theprocedure in Step 5. The horn sounds two times toindicate the sensor identification code has beenmatched to the driver side rear tire, and the TPMSsensor matching process is no longer active.The TIRE LEARNING ACTIVE message on the DICdisplay screen goes off.9. Turn the ignition switch to LOCK/OFF.10. Set all four tires to the recommended air pressurelevel as indicated on the Tire and LoadingInformation label.11. Put the valve caps back on the valve stems.Tire Inspection and RotationWe recommend that you regularly inspect yourvehicles tires, including the spare tire, for signs ofwear or damage. SeeWhen It Is Time for NewTires on page 5-77for more information.Tires should be rotated every 5,000 to 8,000 miles(8 000 to 13 000 km). See Scheduled Maintenanceon page 6-4.The purpose of a regular tire rotation is to achievea uniform wear for all tires on the vehicle. Thiswill ensure that your vehicle continues to performmost like it did when the tires were new.Any time you notice unusual wear, rotate yourtires as soon as possible and check wheelalignment. Also check for damaged tires or wheels.SeeWhen It Is Time for New Tires on page 5-77andWheel Replacement on page 5-82 .When rotating your vehicles tires, always use thecorrect rotation pattern shown here.Do not include the spare tire in the tire rotation.After the tires have been rotated, adjust the frontand rear inflation pressures as shown on the Tireand Loading Information label. See Inflation - TirePressure on page 5-70andLoading the Vehicle onpage 4-33.Reset the Tire Pressure Monitor System. See TirePressure Monitor Operation on page 5-73 .5-76
参考になったと評価
33人が参考になったと評価しています。
その他の取扱説明書
837 view
2916 view
718 view
716 view