シボレーサバーバンの取扱説明書・マニュアル [全578ページ 3.04MB]
2009_chevrolet_suburban_owners.pdf
http://www.chevrolet.com/.../2009_chevrolet_suburban_owners.pdf - 3.04MB
- キャッシュ
66072view
578page / 3.04MB
The vehicle has a shift stabilization feature that adjuststhe transmission shifting to the current driving conditionsin order to reduce rapid upshifts and downshifts. This shiftstabilization feature is designed to determine, beforemaking an upshift, if the engine is able to maintain vehiclespeed by analyzing things such as vehicle speed, throttleposition, and vehicle load. If the shift stabilization featuredetermines that a current vehicle speed cannot bemaintained, the transmission does not upshift and insteadholds the current gear. In some cases, this could appearto be a delayed shift, however the transmission isoperating normally.The vehicles transmission uses adaptive shift controls.Adaptive shift controls continually compares key shiftparameters to pre-programmed ideal shifts stored in thetransmissions computer. The transmission constantlymakes adjustments to improve vehicle performanceaccording to how the vehicle is being used, such as witha heavy load or when the temperature changes. Duringthis adaptive shift control process, shifting might feeldifferent as the transmission determines the bestsettings.When temperatures are very cold, the Hydra-Maticfi6-Speed transmissions gear shifting could be delayedproviding more stable shifts until the engine warmsup. Shifts could be more noticeable with a coldtransmission. This difference in shifting is normal.M (Manual Mode):This position is available onvehicles with the Hydra-Maticfi6-Speed transmission.It lets drivers select the range of gears appropriatefor current driving conditions. If the vehicle hasthis feature, see Range Select Mode (Hydra-Maticfi6-Speed transmission) later in this section.3 (Third):This position is also used for normal driving.It reduces vehicle speed more than D (Drive) withoutusing the brakes. You might choose 3 (Third) instead ofD (Drive) when driving on hilly, winding roads, whentowing a trailer, so there is less shifting between gearsand when going down a steep hill.2 (Second):This position reduces vehicle speedeven more than 3 (Third) without using the brakes.You can use 2 (Second) on hills. It can help controlvehicle speed as you go down steep mountain roads,but then you would also want to use the brakes offand on.If you manually select 2 (Second) in an automatictransmission, the transmission will start in second gear.You can use this feature for reducing the speed ofthe rear wheels when you are trying to start the vehiclefrom a stop on slippery road surfaces.2-35
参考になったと評価
33人が参考になったと評価しています。
その他の取扱説明書
837 view
2916 view
718 view
716 view