PT-LB90NTの取扱説明書・マニュアル [全68ページ 8.58MB]
cb9b3cf2-6572-4b42-97aa-319a89d99e77.pdf
gizport - 2013-08-16
http://dl.owneriq.net/.../cb9b3cf2-6572-4b42-97aa-319a89d99e77.pdf - 8.58MB
- キャッシュ
25994view
68page / 8.58MB
Menu NavigationSettingsENGLISH - 27Menu NavigationNavigating through the MENUOperating procedure JPress the MENU button.1 ) The main menu is displayed.PICTUREPOSITIONLANGUAGEDISPLAY OPTIONPROJECTOR SETUPSECURITYNETWORKPICTURE MODECONTRASTBRIGHTNESSCOLORTINSHARPNESSCOLOR TEMPERATUREDAYLIGHT VIEWSTILL MODENOISE REDUCTIONTV-SYSTEMSTANDARDDEFAULTAUTOOFFOFFAUTOSELECTENTERRETURNPress ▲▼ to scroll to the required 2 ) main menu item and press the ENTER button to select.Select the required menu item from the PICTURE, POSITION, LANGUAGE, DISPLAY OPTION, PROJECTOR SETUP, SECURITY and NETWORK *1 menu. The selected item is highlighted in orange and displays the sub-menu on the right.PICTUREPOSITIONLANGUAGEDISPLAY OPTIONPROJECTOR SETUPSECURITYNETWORKKEYSTONESHIFTOVER SCANASPECTSELECTENTERRETURNPress the ENTER button.3 ) You can select a sub-menu item.PICTUREPOSITIONLANGUAGEDISPLAY OPTIONPROJECTOR SETUPSECURITYNETWORKKEYSTONESHIFTOVER SCANASPECTSELECTENTERRETURNPress ▲▼ buttons to scroll to the 4 ) required sub-menu item and press ◄► buttons or the ENTER button to adjust.The selected item is called up and the other menu items disappear from the screen.KEYSTONEIf there is a lower level, the next level will be displayed.PT-LB90NTU only*1: RemarksPress the zMENU or RETURN button to return to the previous menu. Press repeatedly to escape from the menu mode and return to the projection.Some items and functions may not be adjusted or zavailable, depending on the selected input signals.Some settings are adjustable without any signals. zCalled up item will disappear after 5 seconds zwithout any operation and return to the menu mode.For the sub-menu items, see “Sub-menu” in the z“ON-SCREEN MENU”. (AEpage 28)Resetting to the factory default Jsettings.You can reset most of the customised settings to the factory defaults by pressing the DEFAULT button of the remote control.Press button.The operation depends on the screen displayed currently.While the sub-menu screen is displayed: QThe items of the sub-menu displayed currently are reset to the factory default settings.While the called up item screen is displayed: QOnly the item adjusted currently is reset to the fac -tory default setting.KEYSTONERemarksYou cannot reset all the settings at a time to the zfactory default settings. To reset all the settings to the factory defaults, see “INITIALIZE ALL” in the “PROJECTOR SETUP menu”. (AEpage 42)Some menu items are not available to reset by zpressing the DEFAULT button. Adjust each menu item manually.The triangle mark under the bar indicates factory zdefault setting and the square indicates the current setting. The triangle mark position varies by the selected input signals.Default settingCurrent setting
参考になったと評価
12人が参考になったと評価しています。
この取扱説明書が関連付けられている製品