PT-LB90NTの取扱説明書・マニュアル [全68ページ 8.58MB]
cb9b3cf2-6572-4b42-97aa-319a89d99e77.pdf
gizport - 2013-08-16
http://dl.owneriq.net/.../cb9b3cf2-6572-4b42-97aa-319a89d99e77.pdf - 8.58MB
- キャッシュ
25994view
68page / 8.58MB
POSITION menuSettings32 - ENGLISHPOSITION menuNavigating through the MENU (AEpage 27), select POSITION from the main menu and then select the required item from the sub-menu.Set the selected item with ▲▼◄► buttons. zRemote control Control panelREALTIME KEYSTONEIf the projector is aligned non-perpendicularly to the screen, or if the projection screen has an angled surface, the keystone will be corrected automatically.Change settingChange settingONActiveOFFDeactiveKEYSTONEIf you need to correct the angle of the projection even when the REALTIME KEYSTONE is activated, you can correct the keystone manually.Image OperationRemarksYou can correct the distortion ±30 ° from the plane. zFor a better quality image, installing the projector with a minimum of distortion is recommended.The distortion of the Main menu screen is not zcorrectable.The result of the keystone correction will affect the zaspect ratio and the size of the image.SHIFTSHIFTHV00Horizontal (H): Press ◄► buttons to move the image horizontally.Vertical (V): Press ▲▼ buttons to move the image vertically.RemarksThe image cannot be moved while network signals zare input.Press ◄►▲▼ buttons to move the image. zSHIFT V(Available with signal of network only while ASPECT is set to H FIT)Press ◄► buttons to move the image vertically.DOT CLOCKIf you have interference patterns of the projected image, which is sometimes referred to as moire or noise, you can minimize it by pressing ◄► buttons to adjust the clock frequency.(Available with signal of RGB (Still image) only).NoteDOT CLOCK z needs to be adjusted before adjusting the CLOCK PHASE.CLOCK PHASEIf you require further adjustment for the same reason as the DOT CLOCK adjustment, you can ine adjust the timing of the clock. (Available with signals of RGB/YPBPR only) Press ◄► buttons to adjust.RemarksIf the projecting signal’s dot clock frequency is higher zthan 150 MHz, the adjustment of DOT CLOCK or CLOCK PHASE may not make a difference. See “List of compatible signals”. (AEpage 52)
参考になったと評価
12人が参考になったと評価しています。
この取扱説明書が関連付けられている製品