X3の取扱説明書・マニュアル [全144ページ 4.54MB]
123812.pdf
gizport - 2013-09-06
http://153.127.246.254/.../123812.pdf - 4.54MB
- キャッシュ
7902view
144page / 4.54MB
Replacing components114Side-mounted turn signalsW5W bulb, 5 watts1. Use finger pressure against the rear end of the lamp, refer to arrow, to press it forward for removal.2. Apply gentle pressure to the bulb while turning it to the left and pull it out.3. Install in the reverse order.Front fog lampsH11 bulb, 55 wattsAlways wear gloves and eye protection - the atmosphere inside the H11 bulb is pressurized. Failure to observe this precaution can lead to injuries sh ould the bulb be dam-aged.<1. Pull the cover in front of the fog lamp for-ward.2. Loosen the screw, refer to arrow, pivot headlamp out on this side and remove toward the front.3. Turn the lamp base at the back of the head-lamp to the left and remove it.4. Disconnect the cable connector.5. Slide new bulb onto plug connector; be sure it snaps firmly into place.6. Install in the reverse order.Tail lamps>Turn signal lamp:PY21WSV bulb, 21 watts>Other bulbs:W16W bulb, 16 watts1Brake lamp2Parking lamp/rear lamp, LED3Turn signal4Backup lamp5Rear lamp, LEDIn the event of a defect involving the lamps 2 , 4 and 5 , please consult your BMW Sports Activity Vehicle Center.ChangingOpen the flap in the side panel, refer to page78 .Turn signal lamp:1. Turn bulb holder to the left, refer to arrow 1 , and remove.2. Apply gentle pressure to the bulb fitting while turning it to the left, remove and replace.
参考になったと評価
6人が参考になったと評価しています。
その他の取扱説明書
53900 view
26344 view
21058 view
21213 view
23258 view
もっと見る