1. 取扱説明書・マニュアル >
2. BMW >
3. 自動車 >
4. X3 の使い方、故障・トラブル対処法 >
5. X3 の取扱説明書・マニュアル

X3の取扱説明書・マニュアル [全211ページ 8.62MB]

rearview mirror. The required distance de‐pends on the manual transmitter.4. Simultaneously press and hold the button ofthe desired function on the hand-held trans‐mitter and the button to be programmed onthe interior rearview mirror. The LED on theinterior rearview mirror will begin flashingslowly.5. Release both buttons as soon as the LEDflashes more rapidly. When the LED is flash‐ing faster, this indicates that the button onthe interior rearview mirror has been pro‐grammed.If the LED does not flash faster after at least60 seconds, change the distance betweenthe interior rearview mirror and the hand-held transmitter and repeat the step. Severalmore attempts at different distances may benecessary. Wait at least 15 seconds be‐tween attempts.Canada: if programming with the hand-heldtransmitter was interrupted, hold down theinterior rearview mirror button and repeat‐edly press and release the hand-held trans‐mitter button for 2 seconds.6. To program other functions on other but‐tons, repeat steps 3 to 5.The systems can be controlled using the interiorrearview mirror buttons.Special feature of the alternating-codewireless systemIf you are unable to operate the system after re‐peated programming, please check if the sys‐tem to be controlled features an alternating-code system.Read the system's operating manual, or pressthe programmed button on the interior rearviewmirror longer. If the LED on the interior rearviewmirror starts flashing rapidly and then stays litconstantly for 2 seconds, the system featuresan alternating-code system. Flashing and con‐tinuous illumination of the LED will repeat forapproximately 20 seconds.For systems with an alternating-code system,the integrated universal remote control and thesystem also have to be synchronized.Please read the operating manual of the systembeing set up for information on how to syn‐chronize the system.Synchronizing is easier with the aid of a secondperson.To synchronize:1. Park the vehicle within range of the remote-controlled system.2. Program the relevant button on the interiorrearview mirror as described.3. Locate and press the synchronizing buttonon the system being programmed. You haveapprox. 30 seconds for the next step.4. Hold down the programmed button on theinterior rearview mirror for approximately3 seconds and then release it. If necessary,repeat this work step up to three times in or‐der to finish synchronization. Once synchro‐nization is complete, the programmed func‐tion will be carried out.Reprogramming individual buttons1. Switch on the ignition.2.Press and hold the interior rearview mirrorbutton to be programmed.3.As soon as the interior rearview mirror LEDstarts flashing slowly, hold the hand-heldtransmitter for the system to be controlledapprox. 1 to 3 in/2.5 to 8 cm away from thebuttons on the interior rearview mirror. Therequired distance depends on the manualtransmitter.4.Likewise, press and hold the button of thedesired function on the hand-held transmit‐ter.5. Release both buttons as soon as the interiorrearview mirror LED flashes more rapidly.When the LED is flashing faster, this indi‐cates that the button on the interior rearviewmirror has been programmed. The systemSeite 128Controls Interior equipment128Online Edition for Part no. 01 40 2 903 813 - 07 12 490

もっと見る

このマニュアルの目次

Copyright © 2013 Gizport.jp All Rights Reserved.