1. 取扱説明書・マニュアル >
2. ボルボ >
3. 自動車 >
4. V50 の使い方、故障・トラブル対処法 >
5. V50 の取扱説明書・マニュアル

V50の取扱説明書・マニュアル [全322ページ 8.57MB]

06 Starting and driving Automatic gearbox06161a level suitable for the selected gear, in orderto avoid jerking and stalling.To return to automatic driving mode:•Move the lever to the side to the end posi-tion at D.Kick-downWhen the accelerator pedal is pressed all theway to the floor (beyond the position normallyregarded as full acceleration) a lower gear isimmediately engaged. This is known as kick-down.If the accelerator is released from the kick-down position, the gearbox automaticallychanges up.Kick-down is used when maximum accelera-tion is needed, such as for overtaking.Safety functionTo prevent overrevving the engine, the gearboxcontrol program has a protective downshiftinhibitor which prevents the kick-down func-tion.Geartronic does not permit downshifting/kick-down which would result in an engine speedhigh enough to damage the engine. Nothinghappens if the driver still tries to shift down inthis way at high engine speed – the originalgear remains engaged.When kick-down is activated the car canchange one or more gears at a time dependingon engine speed. The car changes up when theengine reaches its maximum speed in order toprevent damage to the engine.Mechanical gear selector inhibitorG020237The gear selector can be moved forward andback freely between N and D. Other positionsare locked with a latch that is released with theinhibitor button on the gear selector.With the inhibitor button depressed the levercan be moved forwards or backwards betweenP, R, N and D.Automatic gear selector inhibitorCars with an automatic gearbox have specialsafety systems:KeylockTo remove the remote control key, the gearselector must be in the P position. The key islocked in all other positions.Parking position (P)Stationary car with engine running:–Hold your foot on the brake pedal whenmoving the gear selector to another posi-tion.Electric gear inhibitor – Shiftlock Parkingposition (P position)To be able to move the gear selector from theP position to other gear positions, the remotecontrol key must be in position II and the brakepedal must be depressed.Shiftlock – Neutral (N position)If the gear selector is in the N position and thecar has been stationary for at least three sec-onds (irrespective of whether the engine is run-ning) then the gear selector is locked in the Nposition.To be able to move the gear selector from theN position to another gear position, the brakepedal must be depressed and the remote con-trol key must be in position II.

このマニュアルの目次

Copyright © 2013 Gizport.jp All Rights Reserved.