V50の取扱説明書・マニュアル [全322ページ 8.57MB]
V50_owners%20manual_MY12_EN_tp14033.pdf
http://esd.volvocars.com/.../V50_owners%20manual_MY12_EN_tp14033.pdf - 8.57MB
- キャッシュ
66582view
322page / 8.57MB
09 Maintenance and service Replacing bulbs09235Fitting the lamp housing1. Plug in the connector and refit the lamphousing and locking pin. Check that the pinis correctly inserted.2. Check the lighting.The lamp housing must be plugged in andsecured in place before the lighting is switchedon or the remote control key inserted into theignition switch.Dipped beamG019131Removing the cover and bulb1. Undo the whole lamp housing, seepage 234.2. Bend aside the catches and remove thecover.3. Unplug the connector from the bulb.4. Release the spring clip securing the bulb.Press it in/down.5. Pull out the bulb.G019133Fitting a new bulb1. Fit the new bulb. It can only fit in one posi-tion.2. Press the spring clip in/up and then slightlyto the right in order to snap it into position.3. Press the connector back on.4. Refit the plastic cover.5. Refit the lamp housing, see page 234.Main beam, HalogenG019136The illustration shows a halogen bulb.1. Undo the whole lamp housing, seepage 234.2. Undo the cover, located above the lamphousing, by turning it anticlockwise.3. Left-hand headlamp:Turn the bulb holder anticlockwise.Right-hand headlamp:Turn the bulb holder clockwise.
参考になったと評価
64人が参考になったと評価しています。
その他の取扱説明書
1673 view
2499 view