X3の取扱説明書・マニュアル [全278ページ 10.85MB]
123814.pdf
gizport - 2013-09-06
http://153.127.246.254/.../123814.pdf - 10.85MB
- キャッシュ
9200view
278page / 10.85MB
In the event of a pressure loss, the diameter andtherefore the rotational speed of the corre‐sponding wheel change. This is detected andreported as a flat tire.Functional requirementsThe system must have been initialized when thetire inflation pressure was correct; otherwise,reliable signaling of a flat tire is not ensured. In‐itialize the system after each correction of thetire inflation pressure and after every tire orwheel change.System limitsSudden tire damageSudden serious tire damage caused byexternal influences cannot be indicated in ad‐vance.◀A natural, even pressure loss in all four tires can‐not be detected. Therefore, check the tire infla‐tion pressure regularly.The system could be delayed or malfunction inthe following situations:▷When the system has not been initialized.▷When driving on a snowy or slippery roadsurface.▷Sporty driving style: slip in the drive wheels,high lateral acceleration.▷When driving with snow chains.Status displayThe current status of the Flat Tire Monitor canbe displayed on the Control Display, e.g.,whether or not the FTM is active.1. "Vehicle Info"2. "Vehicle status"3. "Flat Tire Monitor"The status is displayed.InitializationThe initialization process adopts the set inflationtire pressures as reference values for the detec‐tion of a flat tire. Initialization is started by con‐firming the inflation pressures.Do not initialize the system when driving withsnow chains.1. "Vehicle Info"2. "Vehicle status"3. "Reset"4. Start the engine - do not drive away.5. Start the initialization with "Reset".6. Drive away.The initialization is completed while driving,which can be interrupted at any time.The initialization automatically continues whendriving resumes.Indication of a flat tireThe yellow warning lamp lights up. ACheck Control message is displayed.There is a flat tire or a major loss in tireinflation pressure.1. Reduce your speed and stop cautiously.Avoid sudden braking and steering maneu‐vers.2.Check whether the vehicle is fitted with reg‐ular tires or run-flat tires.Run-flat tires, refer to page 227 , are labeledwith a circular symbol containing the lettersRSC marked on the tire sidewall.Do not continue driving without run-flattiresDo not continue driving if the vehicle is notequipped with run-flat tires; continued drivingmay result in serious accidents.◀When a flat tire is indicated, DSC Dynamic Sta‐bility Control is switched on if necessary.Actions in the event of a flat tireNormal tires1.Identify the damaged tire.Seite 92Controls Safety92Online Edition for Part no. 01 40 2 608 153 - 09 11 490
参考になったと評価
5人が参考になったと評価しています。
その他の取扱説明書
53089 view
26079 view
20832 view
20984 view
23000 view
もっと見る