2
123146.pdf
hiyoko_kaijyu - 2013-08-21
http://153.127.246.254/.../123146.pdf - 0.30MB - キャッシュ
5606view
32page / 0.30MB
corresponding to the timed area willremain lit up.When the chosen time elapses, the timedarea will switch off and the clock will give aseries of beeps for several seconds. Thetime display will show 00and this will flashon and off, together with the pilot light ofthe hotplate that has disconnected.If the hotplate that has been switched off ishot, its display will show an H, otherwise itwill show a 0. Touch any sensor to switchoff the beeping signal. When more than one hotplate is beingtimed simultaneously, the time display willshow the cooking time remaining in thehotplate to disconnect first by default. Ifyou wish to check the cooking time remai -ning in another hotplate, touch its selectionsensor. For a few seconds the display willshow the remaining cooking time for thathotplate. Changing the programmed timeThe time that you have set can be chan -ged later on if you so wish.1The hotplate being timed must have alre -ady been selected. The correspondingdecimal point (11) must be lit.2Touch the clock sensor (7). The deci -mal point (11) will come on.3Use the or sensors (7/4) to alterthe time.Disconnecting the clockIf you wish to stop the clock before the pro -grammed time has elapsed:1The hotplate being timed must have alre -ady been selected. The correspondingdecimal point (11) must be lit.2Select the clock sensor (7). The deci -mal point (11) will come on.3Use sensor (4) to reduce the timedown to 00. The clock is cancelled butthe hotplate will remain enabled untilyou switch it off.Switching off quickly1The hotplate being timed must have alre -ady been selected. The correspondingdecimal point (11) must be lit.2Select the countdown timer sensor (7). The corresponding decimal point(11) must be lit.3Touching the and sensors (7 and4) at the same time cancels the remai -ning time.You can also switch the hotplate beingtimed off without the programmed timehaving elapsed. In this case, the timer willswitch off too.The clock as a countdown timerWhenever the clock is not being used inconjunction with a cooking area, it can beused as a countdown timer. To do this, youuse the clock without selecting a hotplate.SWITCHING THE COUNTDOWN TIMERONWhen the appliance is switched off.1Touch the On sensor (1).GB19
