2
123146.pdf
hiyoko_kaijyu - 2013-08-21
http://153.127.246.254/.../123146.pdf - 0.30MB - キャッシュ
5606view
32page / 0.30MB
To turn it off quickly: Whatever thepower level, touch sensors and (2/4) simultaneously and the hob will beinstantly switched off.If all the hobs are at 0, all the points on thedisplay will flash.When turning off a hob, an Hwill be dis -played on the corresponding power dis -play if the hob's glass is at a high tempe -rature, which can cause burning, . Whenthe temperature has reduced, the displayturns off (if the stove is switched off). If thestove is still on then a 0is displayed.SWITCHING THE APPLIANCE OFFThe appliance may be switched off at anytime by touching the general on / off sen -sor (1). When in standby mode, an Hisdisplayed on any hot areas. None of theother hotplate displays will light up.After use, disconnect the deviceusing the control; do not rely on thecookware detector.Locking the hob sensorsThe safety function can be activated oncethe stove is switched on. To do this, touchsensor (1) to activate the touch control.Touch buttons and (2/4) simultane -ously, followed by the power increase but -ton (5). An L will appear on the powerdisplays (3), indicating that the touch con -trol is locked. The electronic control will remain locked,even after switching it off using sensor (1), until it is unlocked by the user.Unlock for CookingIf you wish to unlock the touch control forcooking, touch sensor (1) to activate it.Immediately after, touch sensors and(5/4) simultaneously. The Lwill no lon -ger be displayed and the touch control willoperate normally. When the touch controlis switched off using the On/Off sensors(1), the safety function will be reactiva -ted and the Lwill be displayed the nexttime the touch control is turned on.Turning Off the Safety FunctionThe safety function can be deactivatedpermanently, by touching sensors and(5/4) at the same time, followed by sen -sor (4), after having switched on thetouch control using the On/Off sensor (1). After this, when the touch control is turnedon again by using the On/Off sensor (1), the hob will be ready to be used. If thetouch control is locked in the event of apower cut, it will be deactivated.STOP FunctionThis function allows you to pause the coo -king process. If the timer is activated, thiswill also be paused. Activating the Stop Function1The pans are on the hobs, which are setat a specific level 2Touch the Stop sensor (9). The powerdisplays (3) will scroll through the lettersS-T-O-P instead of showing the selectedcooking level. Cooking will remain pau -sed.Deactivating the Stop Function1Touch the Stop sensor (9) followedby any other button except the On/Offsensor (1). Cooking will be resumed GB22
