2
123146.pdf
hiyoko_kaijyu - 2013-08-21
http://153.127.246.254/.../123146.pdf - 0.30MB - キャッシュ
5256view
32page / 0.30MB
Example:You want to cook at power level 6on aninduction cooking area and begin withrapid heating.Select power 9, touch the sensor againand Awill come on, and then come downto power level 6using the sensor. Thesystem keeps the hotplate at power 9(maximum) for 460 or 120 seconds(depending on the model), flashing alter -nately between 6and A, after which timethe cooking level continues at 6automati -cally. MODIFYING THE POWER LEVELDURING HEAT-UP1The selected hotplate must have alreadybeen enabled. The corresponding deci -mal point must be lit (11).2Use the sensor (2, or 5 in models...640 and ...644) to change the powerlevel.When increasing the power using thesensor (2, or 5 in models ...640 and...644) the time that has already elapsed istaken into account.Example:You are cooking and you have chosenlevel 1 power (48 seconds burst of coo -king) and after 30 seconds change it to 4(312 seconds). The remaining time of thebust of cooking will be 282 seconds (312minus 30).Heat-up time will be discontinued oninduction hotplates if the pan is remo -ved. If a pan is put back within the pandetection time (10 minutes) the heat-uptime that remained will recommence.With induction hotplates, heat-up cannotbe enabled if the Power function is ena -bled.SWITCHING HEAT-UP FUNCTION OFFWhen at least 10 seconds have elapsedsince heat-up function was enabled:1Select the hotplate. The decimal point(11) is lit.2Touch the sensor (4).The heat-up function is automatically disa -bled and the hotplate remains at the cons -tant cooking level.The Power function(Concentrated power)except ...604 modelUp to 3.200 watts can be concentrated inthe induction cooking areas using thePower function (see values marked * in thepresentation section).1Select the desired cooking area, thedecimal point (11) will come on.2Next touch the Power sensor or (6). The power level display will showthe symbol P.The maximum duration of the Power func -tion is 10 minutes. When this time elapses,the power level will automatically adjust topower level 9.Each side of the hob has an inductiongenerator that works with a maximumpower or 3,600/3, 700 watts. Therefore, thePower function cannot be activated at thesame time in two heating elements thatare on the same side. In other words, ifthis function is working on a heating ele -ment on the left, the Power function canGB26
