1. 取扱説明書・マニュアル >
2. DELL >
3. パソコン >
4. パソコン本体 >
5. デスクトップパソコン >
6. OptiPlex G1 の使い方、故障・トラブル対処法 >
7. OptiPlex G1 の取扱説明書・マニュアル

OptiPlex G1の取扱説明書・マニュアル [全174ページ 1.59MB]

Battery: Dell OptiPlex GX1 Small-Form-Factor System User's Guidefile:///C|/infodev/2013/eDoc/OpGX1/UG/battery.htm [2/21/2013 11:47:21 AM]Program " for instructions.CAUTION: Before you remove the computer cover, see " Safety First-For You and YourComputer ."2. Remove the computer cover.3. Remove the battery.See Figure 3 in "Inside Your Computer" for the location of the battery.NOTICE: If you pry the battery out of its socket with a blunt object, be careful not to touch thesystem board with the object. Make certain that the object is inserted between the battery andthe socket before attempting to pry out the battery. Otherwise, you may damage the systemboard by prying off the socket or by breaking circuit traces on the system board.Pry the battery out of its socket with your fingers or with a blunt, nonconductive object, such as a plasticscrewdriver.4. Install the new battery.Orient the battery with the side labeled "+" facing up (see Figure 1). Then insert the battery into thesocket, and snap it into place.Figure 1. System Battery Replacement1Battery2Battery socket5. Replace the computer cover, and reconnect your computer and peripherals to their electrical outletsand turn them on.NOTE: If Enabled, the Chassis Intrusion option will cause the following message to be displayedat the next system start-up:ALERT! Cover was previously removed.6. Enter the System Setup program, and confirm that the battery is operating properly.Enter the correct time and date through the System Setup program's Time and Date options. Also, usethe copy you made in step 1 of the preceding procedure to restore the correct settings for other system

このマニュアルの目次

Copyright © 2013 Gizport.jp All Rights Reserved.