1. 取扱説明書・マニュアル >
2. DELL >
3. パソコン >
4. パソコン本体 >
5. デスクトップパソコン >
6. OptiPlex G1 の使い方、故障・トラブル対処法 >
7. OptiPlex G1 の取扱説明書・マニュアル

OptiPlex G1の取扱説明書・マニュアル [全174ページ 1.59MB]

Dell Diagnostics: Dell OptiPlex GX1 Small-Form-Factor System User's Guidefile:///C|/infodev/2013/eDoc/OpGX1/UG/diag.htm [2/21/2013 11:47:14 AM]Another possible cause for errors is the external device. Use the documentation that came with theperipheral to troubleshoot it and confirm that it is working properly. (Most printers have a self-test.)After you eliminate incorrect system configuration information settings, peripheral malfunctions, and softwareerrors as potential causes of port problems, you can run the subtests in the Parallel Ports Test Groupcheck your hardware. Although the following symptoms can be caused by faulty peripherals or softwareerrors, they might also suggest a port problem:If a peripheral works intermittently or produces intermittent errors, the port may be faulty.If the computer displays an error message that is related to the external device connected to a port, butcorrections to the device do not resolve the error, run the appropriate subtest in the Parallel Ports TestGroup.If your software and the Dell Diagnostics do not recognize that you have a parallel port, you shouldcheck the Parallel Port category in the System Setup program, and if necessary, run the appropriatesubtest in the Parallel Ports Test Group.SCSI Devices Test GroupThe subtests in the SCSI Devices Test Group check the functionality of up to four SCSI host adapters andall the SCSI devices attached to them.NOTES: Before conducting these subtests on CD-ROM drives, insert a CD with audio and datatracks (such as a multimedia CD) into each CD-ROM drive. All of the subtests, except for the AudioOutput Test, require a CD with data tracks. The Audio Output Test requires a CD with audio tracks.If a CD-ROM drive is empty or if it contains a CD that does not have the required data or audio tracks(depending on the subtest[s] being conducted), the subtest(s) will fail.The seven subtests in the SCSI Devices Test Group confirm the following drive functions:Internal DiagnosticCauses the device to run its internal self-test.Seek TestChecks the device's ability to search for a specified track on the device and to position itsread/write heads to all tracks.Read TestPositions the read/write heads at each block of the device for reading data and verifies that alltracks on the device can be read correctly.Write TestPositions the read/write heads at each block of the device and verifies that all tracks on thedevice can be written to correctly.Audio Output Test

このマニュアルの目次

Copyright © 2013 Gizport.jp All Rights Reserved.