X3の取扱説明書・マニュアル [全262ページ 11.20MB]
123813.pdf
gizport - 2013-09-06
http://153.127.246.254/.../123813.pdf - 11.20MB
- キャッシュ
53910view
262page / 11.20MB
Brief status displayBrief display in the speedometer:Selected desired speedIf --- appears briefly, conditions may not be ad‐equate to operate the system.PDC Park Distance Control*The conceptIn addition to the PDC Park Distance Control, thebackup camera*, refer to page 95, can beswitched on.PDC supports you when parking. Objects thatyou are approaching slowly in front of or behindyour vehicle are indicated with:▷Signal tones.▷Visual display.MeasurementMeasurements are made by ultrasound sensorsin the bumpers.The range is approx. 6 ft/2 m.An acoustic warning is first given:▷By the front sensors and two rear cornersensors at approx. 24 in/60 cm.▷By the rear middle sensors at approx. 5 ft/1.50 m.System limitsCheck the traffic situation as wellPDC cannot serve as a substitute for thedriver's personal judgment of the traffic situa‐tion. Check the traffic situation around the vehi‐cle with your own eyes. Otherwise, an accidentcould result from road users or objects locatedoutside of the PDC detection range.Loud noises from outside and inside the vehiclemay prevent you from hearing the PDC's signaltone.◀Avoid driving quickly with PDCAvoid approaching an object quickly.Avoid driving away quickly while PDC is not yetactive.For technical reasons, the system may other‐wise be too late in issuing a warning.◀Limits of ultrasonic measurementThe detection of objects can reach the physicallimits of ultrasonic measurement, for instance:▷With tow bars and trailer hitches.▷With thin or wedge-shaped objects.▷With low objects.▷With objects with corners and sharp edges.Low objects already displayed, e.g., curbs, canmove into the blind area of the sensors before orafter a continuous tone sounds.High, protruding objects such as ledges may notbe detected.False warningsPDC may issue a warning under the followingconditions even though there is no obstaclewithin the detection range:▷In heavy rain.▷When sensors are very dirty or covered inice.▷When sensors are covered in snow.▷On rough road surfaces.▷In large buildings with right angles andsmooth walls, e.g., in underground garages.▷In heavy exhaust.▷Due to other ultrasound sources, e.g.,sweeping machines, high pressure steamcleaners or neon lights.Switching on automaticallySelect transmission position R with the enginerunning.Switching off automaticallyThe system switches off and the LED goes out:Seite 9393Online Edition for Part no. 01 40 2 606 190 - 12 10 500 ReferenceMobilityCommunicationEntertainmentNavigationDriving tipsControlsAt a glance
参考になったと評価
50人が参考になったと評価しています。
その他の取扱説明書
26349 view
21061 view
21216 view
23259 view
22378 view
もっと見る