1. 取扱説明書・マニュアル >
2. BMW >
3. 自動車 >
4. Z4 の使い方、故障・トラブル対処法 >
5. Z4 の取扱説明書・マニュアル

Z4の取扱説明書・マニュアル [全247ページ 11.67MB]

shifts down without requiring your interven‐tion.Shifting down rapidly: even in manual mode, youcan skip several gears to achieve optimal accel‐eration. Do so by pressing the accelerator pastthe resistance point.Changing to drive modePush the selector lever to the right.Shifting gears via the selector leverIn manual mode:▷To shift up, pull back the selector lever.▷To shift down, push it forward.Shifting gears using the shift paddles*on the steering wheelThe shift paddles allow you to shift gears with‐out taking your hands off the steering wheel.You do not need to raise your foot from the ac‐celerator when doing so.▷To shift up: press one of the shift paddlesback, arrow 1.▷To shift down: press one of the shift paddlesforward, arrow 2.Gears can be shifted using the shift paddles indrive mode or in manual mode.Gear change in manual modeWhen manual mode is active, refer to page 59 ,gears can be changed using the shift paddles orthe selector lever.Gear change in drive modeThe shift paddles can be used to change gearsin drive mode as well.Afterwards, if the shift paddles are not used forsome time and vehicle acceleration is insuffi‐cient, the forward gears are changed again au‐tomatically.Launch ControlLaunch Control enables you to drive off with anoptimal vehicle acceleration on a high grip roadsurface.Do not use Launch Control too oftenDo not use Launch Control too often, asthe higher loads on the vehicle lead to prematurecomponent wear.◀Launch Control is available when the engine isat operating temperature, i.e., after driving con‐tinuously for at least 6 miles/10 km.1. With the engine running, depress the brakepedal with your left foot.2. Activate the SPORT+ program of the Dy‐namic Driving Control, refer to page 88 .3. With the vehicle stationary, activate manualmode and select first gear.4. Press the accelerator all the way down. Theengine speed when driving off is controlled.A flag symbol appears in the instrumentcluster.5.The vehicle accelerates when you releasethe brake pedal. Keep the acceleratorpressed all the way down.6.The transmission shifts up automatically aslong as the accelerator is pressed all the waydown.Launch Control only becomes available againafter a certain distance has been driven.Launch Control can only be used after thebreak-in phase, refer to page 112 .To maintain driving stability, activate DSCwhenever possible.Manually releasing and engaging thetransmission lockIf a power failure occurs, e.g., if the battery isdischarged or disconnected, the transmissionlock must be released manually, otherwise theSeite 6060Online Edition for Part no. 01 41 2 604 231 - 03 10 500Driving

もっと見る

このマニュアルの目次

Copyright © 2013 Gizport.jp All Rights Reserved.