Z4の取扱説明書・マニュアル [全220ページ 9.90MB]
123916.pdf
gizport - 2013-09-07
http://153.127.246.254/.../123916.pdf - 9.90MB
- キャッシュ
31138view
220page / 9.90MB
cient, the forward gears are changed again au‐tomatically.Launch ControlLaunch Control enables you to drive off with anoptimal vehicle acceleration on a high grip roadsurface.Do not use Launch Control too oftenDo not use Launch Control too often, asthe higher loads on the vehicle lead to prematurecomponent wear.◀Launch Control is available when the engine isat operating temperature, i.e., after driving con‐tinuously for at least 6 miles/10 km.1. With the engine running, depress the brakepedal with your left foot.2. Activate the SPORT+ program of the Dy‐namic Driving Control, refer to page 82.3. With the vehicle stationary, activate manualmode and select first gear.4. Press the accelerator all the way down. Theengine speed when driving off is controlled.A flag symbol appears in the instrumentcluster.5.The vehicle accelerates when you releasethe brake pedal. Keep the acceleratorpressed all the way down.6.The transmission shifts up automatically aslong as the accelerator is pressed all the waydown.Launch Control only becomes available againafter a certain distance has been driven.Launch Control can only be used after thebreak-in phase, refer to page 108 .To maintain driving stability, activate DSCwhenever possible.Manually releasing and engaging thetransmission lockIf a power failure occurs, e.g., if the battery isdischarged or disconnected, the transmissionlock must be released manually, otherwise therear wheels are blocked and the vehicle cannotbe towed.Release the transmission lock manually for tow‐ing only and set the parking brake beforehand toprevent the vehicle from rolling. After parkingthe vehicle, engage the transmission lock againmanually, refer to page 59.Manual release1. Unclip the sleeve of the selector lever.2. Pull the sleeve up over the selector lever un‐til the sleeve is inside out.3. Unclip and raise cover frame.4. Insert an Allen wrench of the right size intothe cap.5.Turn the cap with the Allen wrench, arrow 1,and remove it, arrow 2.6.Insert the Allen wrench into the opening, ar‐row 1.Seite 58Controls Driving58Online Edition for Part no. 01 40 2 609 184 - 09 11 500
参考になったと評価
11人が参考になったと評価しています。
その他の取扱説明書
38351 view
13905 view
21365 view
21069 view
21361 view
もっと見る